Yamaha A15W 15" Subwoofer

The A15W Subwoofer is the perfect piece to make your A Series system complete. Features a 15" woofer, recessed side handles, black carpet covering, and both a Speakon and 1/4" input connector.

Mackie SWA1501 Active High Output 15-Inch Subwoofer System

The Mackie SWA1501 Subwoofer System features a high-precision 15" transducer combined with application-specific amplifier technology. The system is composed of a single compact subwoofer cabinet with built-in control and amplification.The transducer used in the SWA1501 system features a 3", inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting and structural cooling that provide lower temperatures and substantially improved power compression characteristics.The amplifier uses a proprietary high-efficiency, high-current amplifier designed to provide high current levels at all levels of operation. Having access to high current levels, no matter what the power output, is absolutely critical in achieving precise, total control of the woofer mass. This control is responsible for lowering audible distortion artifacts and providing aggressive attack through the operating band pass of the system. The amplifier is mounted on a large, finned aluminum heat sink, and is rated at 500W RMS continuous output.The SWA1501 features a sophisticated onboard control system, allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts a line-level input signal and has loop-out connectors for signal routing to other devices. It also has high-pass output connectors for connection...

Nady PSW15 600W 15" Subwoofer

The Nady PSW15 600W 15" Subwoofer is a speaker with 2" voice coil, 50-oz. magnet, 20-500Hz response, and 600W program power rating. Cabinet is built for road use, featuring recessed handles, protective corners, and a strong grille. 16-1/2"W x 26"H x 19-1/10"D. The Nady PSW15 weights 48 lbs.

QSC HPR151W 15" Powered Subwoofer

The HPR151W rules for high-level dance music or ultimate bass and kick drum reinforcement with 700W of pure QSC power and a high-power 15" woofer. It boasts low-frequency reproduction down to 42Hz. Flexible input signal processing and connectivity allow it to be used in small or large PA systems. It has a stereo electronic crossover and balanced line-level outputs as well as gain, low-cut filter, front LED on/off, power, and circuit breaker controls.Each model in the HPR series features a high-power, reliable QSC power module and equally high-quality speakers. Using sophisticated signal processing each power module is carefully tailored to the speaker system for a matched fit and ultra-high-fidelity sound. HPR power modules use the same top-quality components and designs as standard QSC rackmount power amps with thick aluminum heat sinks for quiet, efficient cooling and discrete circuitry for the best performance. All HPR enclosures are constructed using marine-quality 13-ply birch and have a heavy 16-gauge perforated steel grille. A switchable grille-mounted power LED adds a distinctive touch.

B-52 MX-18S 18" 550W Subwoofer

Extend the low-frequency response of any MX-Series full-range system to its lowest octave with the B-52 MX-18S 18" 550W Subwoofer. The MX-18S uses an American-made cast-frame 18" subwoofer with a 3.5" high-temperature polyamide voice coil. The rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Finished with impact-resistant black carpet. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. A polemount adapter provides for easy installation of a metal tube to support the MX-15.

Squier SQ-Sub Subwoofer

You'll be amazed by the fullness and quality the SQ-Sub adds to your sound. Black textured-vinyl, black metal corners, rubber feet, pocket handles, single round port. A special 12" driver with 2" voice coil is designed for low frequencies. Handles 300W program, 600W peak at 8 ohms. Dual 1/4" inputs (paralleled). Dimensions: 18.5"W x 18.5"H x 18.5"D. 53 lbs.

Peavey PV 118 Single 18" Subwoofer

The Peavey PV 118 Single 18" Subwoofer is a compact, vented subwoofer system using an 18" heavy-duty woofer with a 3" voice coil and a 65-oz. magnet. The black, perforated steel grille and steel corners provide protection and a professional appearance, and the sturdy steel handles allow ease of transport. A top polemount for 1-3/8" stand poles is incorporated and can be connected in parallel for daisy-chaining or to send a full-range signal to a P.A. cabinet. The impressive 400W program power rating allows plenty of gut-pounding bass. The internal low-pass crossover network, along with the vented enclosure, provides great bass response that will add the thump you desire.

JBL MRX528S Dual 18" Subwoofer

The MRX528S is a compact, portable high-power subwoofer with dual 2044H 18" woofers in a front-loaded, vented enclosure. The enclosure is designed to present a minimum frontal area. It is also configured in an upright format to permit the convenient stacking of full-range enclosures on top without the need for an additional pole. The system offers complete input connection flexibility for compatibility with a variety of cabling schemes. The input panel incorporates a pair of Neutrik Speakon NL-4 connectors wired in parallel. The MRX528S is supplied with pins +1/-1 connected to the woofer. This may be easily reconfigured to work with cabling systems intended to drive subwoofers on pins +2/-2. The enclosure is constructed of quality plywood, coated in JBL s rugged DuraFlex finish and is braced to maximize low-frequency performance. The attractive CNC-machined, 16-gauge steel grille is internally lined with an acoustically transparent screen to provide additional driver protection and give a very professional appearance.

JBL MRX518S Single 18" Subwoofer

The MRX518S is a compact, high-power subwoofer containing a 2044G 18" woofer in a front-loaded, vented enclosure. The enclosure is designed to present a minimum frontal area. The system offers complete input connection flexibility for compatibility with a variety of cabling schemes. The input panel incorporates a pair of Neutrik Speakon NL-4 connectors wired in parallel. The MRX518S is supplied with pins +1/-1 connected to the woofer. This may be easily reconfigured to work with cabling systems intended to drive subwoofers on pins +2/-2. For "subwoofer/satellite" configurations, the MRX518S is equipped with a top-mounted, 36mm polemount socket that can receive the optional SS3-BK pole. This can be used to mount speakers equipped with standard 35mm pole sockets and weighing up to 100 lbs. The enclosure is constructed of top-quality plywood, coated in JBL's rugged DuraFlex finish, and braced to maximize low- frequency performance. The attractive CNC-machined, 16-gauge steel grille is internally lined with an acoustically transparent screen to provide additional driver protection and give a very professional appearance.

QSC HPR181i 18" Powered Subwoofer

For high-level dance music or reinforcement of bass instruments and kick drum, an HPR series subwoofer will add low-frequency extension and power to any sound system. The HPR181i single 18" subwoofer offers truly impressive low frequency extension and output. A 4" voice-coil driver and a 700 watt power module work to produce 134 dB SPL peak, at 1 meter with frequency response down to 39 Hz. The HPR181i also includes a top-mounted 35mm pole socket and heavy-duty 3" casters to facilitate load-in and load-out.

EAW LA128Z Dual 18" Subwoofer

The EAW LA128z is a dedicated subwoofer audio speaker with two 18" transducers in a trapezoidal enclosure. Tuned enclosure venting improves LF response, and the addition of an MX Series processor with factory settings can further optimize performance. The LA128z subwoofer is engineered to complement the LA Series full range systems or any full range loudspeaker. Recessed cups on the top accept the footpads of an LA325, LA460, or another LA sub.

Buttkicker BKP Platform

Easily accepts either ButtKicker Concert or LFE. Ideal for bass players, standing performers, and DJs. Matte black molded plastic top finish. Also gives a great foot massage! 32" x 18" at top and bottom, with 20" sides. 17 lbs.

EAW LA400 Bent Bass Horn Subwoofer

The LA400 speaker uses bass horn technology that was developed for the KF940 SuperSub. It loads a powerful 12" woofer on an expanding bass horn that is 8' in length, and provides extremely high output sub bass response in a compact, portable enclosure. The efficiency provided by EAW's advanced horn- loading techniques permits the LA400 to extend overall system frequency to the lowest octaves.The EAW LA400 is designed to be easily transportable. The "towel bar" handle across the mouth of the horn and cut-away lower rear corner allows users to roll the LA400 onto its rear-mounted casters with a minimum of effort. Mounting the casters on the enclosure's rear lowers the system's center of gravity during transport for easier rolling and more stable packing. A stout grille protects the drivers from objects that might fall into the horn when on its back.The LA400 defies conventional wisdom, which states that an 18" woofer is required to drive a bass horn. 18" woofers simply do not have the rigidity required to drive the high acoustic impedance present in a horn throat. As a result, traditional 18" bass bins get loud, but only produce one note very well. The LA400 in contrast uses a proprietary heavy duty 12" woofer. The woofer has the motor structure of a traditional 18" device, and its cone is reinforced to be a better engine for compact horn-loading. This woofer is then loaded onto a properly designed bass horn...

JBL PRX518S 18" Self-Powered Subwoofer System 18"

Compact and powerful, the JBL PRX518S offers the performance of an 18" subwoofer in a package not much larger than a typical 15" sub. With a 36 mm pole receptacle that accepts the JBL SS3-BK speaker stand on the top panel and integrated stereo pass-thru, with selectable HP filter, this is the perfect complement to the PRX500 full-range systems. Configured with a PRX512M or PRX515; the result is a highly transportable, high performance sub-satellite system. The addition of a polarity reverse option further enables system optimization.The PRX518 is a high performance self-powered compact subwoofer system. The PRX518S is comprised of a 2044E 460 mm (18") VGC (Vented Gap Cooled) woofer driven by a Crown International Class-D digital power amplifier. A propriety digital processing chip (DSP) chip is at the core of a fully featured input section, providing user selectable crossover functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.The enclosure is constructed of quality plywood and coated in JBL's rugged DuraFlex finish. An integrated pole mount on the top enables an easy sub/satellite configuration. The CNC machined steel grille wraps around the sides of the enclosure so there are no protruding lips on the front of the box to create acoustical interference. The grille is also lined with an acoustically transparent foam to provide additional driver...

Behringer E1800X Eurolive Performer Series Sub

The Behringer E1800X Eurolive Performer Series Subwoofer is made to order for bottom-heavy styles from hard rock to hip-hop, with 400W/800W program/peak power handling for serious bass impact. The B1800X Performer's heavy-duty 18" bass driver handles high sound pressure levels at a frequency range of 40 300Hz. Experience tight and accurate bass response at the most wallet-friendly price anywhere. A built-in switchable crossover allows for optional passive or bi-amping operation. The rugged construction ensures years of dependable performance.

Behringer B1800X Pro Eurolive Professional Series Subwoofer

The Behringer B1800X Pro Eurolive Professional Series Subwoofer handles 800W/1,600W program/peak power @ 8 ohms for brawny bottom-end response. Add earth-shaking bass to your mix with the B1800X Pro Eurolive Sub. Ideal for giving impact to styles including hard rock, house, hip-hop, metal, reggae, or rap. The Behringer B1800X subwoofer also goes amazingly easy on your bank book with its solid price-to-performance ratio. The B1800X Pro's long-excursion 18" bass driver reproduces high sound pressure levels with maximum efficiency in the frequency range of 40 300Hz @ 8 ohms. This allows the B1800X PRO to achieve a tight and accurate bass response at intense output levels. A switchable crossover allows optional passive or bi-amp operation. This rugged Behringer subwoofer is designed to keep up with your music, no matter how demanding the gig. Neutrik Speakon connectors. 21-1/2"W x 27-315"H x 21-3/4"D. 77 lbs.

Peavey PR Subwoofer 15" Subwoofer

When you need serious low end, call on the PR sub. Loaded with a high-end 15" loudspeaker with 2.5" moving coil, housed in a heavy-duty poured polypropylene cab. 400W program/800W peak. Metal lattice speaker grille. Built-in stand flange.

QSC HPR151i 15" Powered Subwoofer

For high-level dance music or reinforcement of bass instruments and kick drum, an HPR series subwoofer will add low-frequency extension and power to any sound system. When the requirement is for compact size and tight, punchy low-end, the single 15" HPR151i subwoofer is the answer. The 700 watt power module is capable of producing 133 dB peak SPL with frequency response down to 43 Hz and sound quality that rivals many 18" subwoofers. A top-mounted 35mm pole socket is provided for use in sub/satellite systems.

EAW LA118Z Single 18" Subwoofer

The EAW LA118z is a dedicated subwoofer with an 18" transducer in a trapezoidal enclosure. Tuned enclosure venting improves LF response, and the addition of an MX Series processor with factory settings can further optimize performance. The LA118z subwoofer is engineered to complement the LA Series full range systems or any full range loudspeaker. Recessed cups on the top accept the footpads of an LA325, LA460, or another LA118z.