Peavey GPS 900 Power Amp

For applications ranging from permanent installations to use by touring bands, GPS power amps are designed to meet the full spectrum of performance demands. They come in a full range of wattages, and all feature DDT speaker protection. All are backed by a 5-year warranty. Delivers 330W RMS per channel @ 4 ohms, 200W per channel @ 8 ohms, 900W @ 4 ohms bridged. 2 rack spaces.

Peavey GPS 1500 Power Amp

For applications ranging from permanent installations to use by touring bands, GPS power amps are designed to meet the full spectrum of performance demands. They come in a full range of wattages, and all feature DDT speaker protection. All are backed by a 5-year warranty. The GPS 1500 delivers 750W RMS per channel @ 4 ohms. 2 rack spaces.

Peavey GPS 2600 Power Amp

For applications ranging from permanent installations to use by touring bands, GPS power amps are designed to meet the full spectrum of performance demands. They come in a full range of wattages, and all feature DDT speaker protection. All are backed by a 5-year warranty. The GPS 2600 delivers 950W RMS per channel @ 4 ohms, 620W per channel @ 8 ohms, and 2,600W @ 4 ohms bridged. 2 rack spaces.

Gem Sound XP-550 Stereo Power Amp

With mono/stereo operation and plenty of power for punchy sound, the Gem Sound XP-550 Stereo Power Amp will find a permanent home in your rack. It packs up to 600W/ch @ 8 ohms in bridged mono mode. 300W per channel @ 8 ohms stereo, and 500W per channel @ 4 ohms stereo. It has RCA and balanced XLR inputs and 4 dual banana plug, 1/4", and binding post outputs. A voltage selector switch on the rear panel lets you choose 115V or 230V operation. The front panel features a clip indicator, protection indicator, power switch, and output level controls.

Peavey PV 3800 Power Amplifier

Add a 3,800W PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.

Behringer EuroPower EP1500 Power Amp

The Beringer EuroPower EP1500 Power Amp features such high-quality components as toroidal transformers and ultrareliable Toshiba/Fairchild high-power transistors. This Behringer amp is equipped with independent channel limiters and selectable low-cut filters (30 or 50Hz), an efficient cooling system, XLR and 1/4" TRS inputs, and Speakon plus binding post outputs. Capable of parallel and bridged mono operation. 2x700W @ 2 ohms; 1,400W @ 4 ohms bridged.

Behringer EuroPower EP2500 Power Amp

The Behringer EuroPower EP2500 Power Amp features such high-quality components as toroidal transformers and ultrareliable Toshiba/Fairchild high- power transistors. It comes equipped with independent channel limiters and selectable low-cut filters (30 or 50Hz), an efficient cooling system, XLR and 1/4" TRS inputs, plus Speakon and binding post outputs. Capable of parallel and bridged mono operation. 2x1,200W @ 2 ohms; 2,400W @ 4 ohms bridged.

Peavey PowerMode 4 Power Amplifier

The PowerMode 4 is a all-purpose 4-channel amp operable in parallel, bridged, stereo 2-way and subwoofer modes. This 2-rack space unit features 4 power amps rated to deliver 180 watts each into 4 8 ohm speakers, with an innovative input section that offers numerous system hookup configurations. All 4 channels will operate full-range or in stereo 2-way or bridged modes, while channels 1 and 2 will also operate in parallel. Channels 3 and 4 have 800W subwoofer output that enables a low-pass filter to drive frequencies below 120 Hz to a subwoofer (channels 1 and 2 run full-range when this mode is engaged; channels 3 and 4 are bridged).The PowerMode 4 also features a variable-speed cooling fan to ensure cool operating temperatures, XLR-1/4" combination inputs, and Peavey's strong 5-year warranty.

Peavey PV 1600 Bi Pack Power Amplifier

The PV 1600 Bi-Pack is an integrated, all-in-one power solution for bi-amping non-powered speakers such as the Peavey SP 2, SP 4 or Impulse 1015. The PV 1600 Bi-Pack delivers 930 watts to woofers (lows) and 350 watts to compression drivers (highs) through a specialized crossover with built-in EQ and phase adjustment. In addition to a 50 Hz bass boost with roll off, a gentle slope throughout the rest of the low frequency range is utilized up to the crossover frequency.

Peavey GPS 3500 Power Amp

For applications ranging from permanent installations to use by touring bands, Peavey's GPS power amps are targeted to meet the full spectrum of performance demands. They come in a full range of wattages, and all feature DDT speaker protection. All are backed by a 5-year warranty. The GPS 3500 delivers 1,200W RMS per channel @ 4 ohms, 775W @ 8 ohms, and 3,500W @ 4 ohms bridged. 2 rackspaces.

Peavey DPC 1400X DJ Power Amp

Single rackspace digital power amp with Peavey's patented digital power conversion technology. Delivers crystal clear highs and a thumping low-end response. At only 15 lbs., it cranks out 1400 watts into 4 ohms bridged or 700Wx2 into 2 ohms. Front panel level controls and thru jacks to the rear panel make it easy to daisy-chain multiple units.

Gem Sound XP-450 Stereo Power Amp

With mono/stereo operation and plenty of power for punchy sound, the Gem Sound XP-450 Stereo Power Amp will find a permanent home in your rack. It packs up to 700W @ 4 ohms in mono-bridged mode, 200W per channel @ 8 ohms stereo, and 350W per channel @ 4 ohms stereo. It has RCA and balanced XLR inputs and 4 dual banana plug, 1/4", and binding post outputs. A voltage selector switch on the rear panel lets you choose 115V or 230V operation. The front panel features a clip indicator, protection indicator, power switch, and output level controls.

QSC PLX1104 Professional Power Amplifier

The compact PLX1104 power amplifier brings the same performance and technology as the rest of QSC's PLX2 Series to applications that don't require bridged or two-ohm operation. Designed to power one or two speakers from each amplifier channel (4-ohm minimum loading), the PLX1104 offers a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds, the plug-and-play PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.The PLX1104 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output...

<< Previous    1...   3  4  5  [6]  7    Next >>