Galaxy Powered Micro Spot Monitor

The Galaxy MSPA Powered Micro Spot, like the original Powered Hot Spot, delivers high power, but in a more compact package that's smaller than a football. Weighing only 4.82 pounds, the Powered Micro Spot delivers a clean 30 watts of power to its internal 4.5" speaker and can reach SPL levels of 99 dB. XLR and 1/4" inputs respectively accept microphone and line level signals. The Powered Micro Spot speaker also features a 2-band equalizer and built-in compressor/limiter circuitry that controls the amplifier's gain, acting like a compressor on transient signals and a brick wall limiter on signals that continuously exceed a predetermined limit. This results in an apparent 6 dB increase in SPL without distortion. That's twice the sound pressure! With the included mounting hardware, the Powered Micro Spot can be permanently mounted to a wall or ceiling, or conveniently mounted atop a microphone stand for portable use. The Galaxy Micro Spot works great in many applications. The powered audio monitor is diverse enough for live sound, church, fixed installation, etc. It's compact and lightweight enough to take anywhere.

Galaxy Powered Micro Spot Monitor

The Galaxy Powered Micro Spot is designed for use anywhere sound reinforcement is needed. Its universal power supply will accept AC sources ranging from 90 volts to 250 volts, 50 or 60 Hz. Weighing just 4.82 pounds, the Powered Micro Spot delivers a clean 30 watts of power to its 4.5" speaker and can reach SPL levels of 99 dB. XLR and 1/4" inputs accept microphone and line level signals. The Powered Micro Spot also features a 2-band equalizer and built-in compressor/limiter circuitry that controls the amplifier's gain, acting like a compressor on transient signals and a brick wall limiter on signals that continuously exceed a predetermined limit. This results in an apparent 6dB increase in SPL without distortion. That's twice the sound pressure! With the included mounting hardware, the Powered Micro Spot can be permanently mounted on a wall or ceiling, or conveniently mounted atop a microphone stand for portable use.

TC Helicon VSM-200P VoiceSolo Passive Voice Monitor

If you need multiple monitors and have external amplifier channels available, look no further than the TC Helicon VSM-200P VoiceSolo Passive Voice Monitor. The VSM-200P delivers intelligible, natural vocal sound thanks to an ICT (Inductively Coupled Technology) point source driver and a rugged, efficient cast aluminum enclosure. Non-electrical methods are used to couple the tweeter with the woofer making the tweeter indestructible.VSM-200P VoiceSolo Passive Voice Monitor integrates with your mic stand with included hardware to save floor space. Attach the hardware to your stand once, and the monitor will pop on and off. Also rocks back to 3 different angles on the floor. Features parallel combo SpeakOn/1/4" connectors for easy setup with any amplifier. The parallel connector lets you connect multiple units off one amplifier channel. A front-panel volume control lets you decide how loud you want your monitor mix and does not affect the next monitor in the chain.

TC Helicon VSM-200 VoiceSolo Active Voice Monitor

If you want to replace your current monitor and have someone running your mixes, look no further than the TC Helicon VSM-200 VoiceSolo Active Voice Monitor. The VSM-200 delivers intelligible, natural vocal sound thanks to an ICT (Inductively Coupled Technology) point source driver; a rugged, efficient cast aluminum enclosure; and a 150W BASH amplifier with a built-in limiter. Non-electrical methods are used to couple the tweeter with the woofer making the tweeter indestructible.The VSM-200 VoiceSolo Active Voice Monitor mounts on your mic stand with included hardware to save floor space. Attach the hardware to your stand once, and the monitor will pop on and off. It also rocks back to 3 different angles on the floor. Features mic and line inputs and a pass-thru to connect additional VSM-200s or VSM-300s in parallel. A front-panel volume control lets you decide how loud you want your monitor mix and does not affect the level going to any other monitor or the mixing console.

Galaxy CORE Powered Hot Spot with Stand Adapter

The Galaxy CORE Powered Hot Spot produces 146 watts, enough to power its internal speaker and 2 additional Galaxy Hot Spot personal monitors. It features a 1/4" input, an XLR input, a 3-band equalizer, and a ferrofluid-cooled 5-inch driver with a 40-oz. magnet. It mounts on a mic stand for close placement to yjr performer and delivers incredibly clear sound that can cut through extreme ambient-noise levels. Its cab is made of black, fire-retardant styrene with a cast-aluminum grille.

B-52 MX-MN 15 15 Inch Two Way Stage Monitor 300 Watts

The B-52 MX-MN 15 is an ideal short-to-medium-distance stage monitor that provides 2 discrete angles. It utilizes a B-52 15-85 woofer with a 2-1/2 polyamide voice coil, and a 1 -exit titanium compression driver mounted on a constant directivity horn to produce big sound with 300W power handling capability. Rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Input connectors include 2 - 1/4 phone jacks and a genuine Neutrik NL4 connector.Covered with impact-resistant black carpet.

<< Previous    1...   2  3  [4]  5  6    Next >>