Nady FWA-15 Powered Floor Monitor
 259.99 Learn More or Add to Cart with Low Price Guarantee
160W RMS through a huge 15" driver is serious power for any stage monitor, or use it as another main. The Nady FWA-15 Powered Floor Monitor has a 5" x 15" compression piezo horn for sparkling high-end. 3 channel inputs include XLR and 1/4" mic level, balanced XLR and 1/4" line level, plus balanced XLR and dual RCA line level. Each of the channels features input gain control, making it so versatile you could use it for a solo act without a mixer. Line level balanced XLR and unbalanced 1/4" outputs make any kind of chaining a breeze. Master volume, treble, and bass controls; power and clipping LEDs; and on/off switch. The monitors have a durable black carpet cover, reinforced corners, and recessed carry handles. 60Hz to 18kHz response and 87dB S/N ratio. 18"W x 30"H x 21- 1/2"D, 53 lbs.
Fender 1270P Powered Monitor
 239.99 Learn More or Add to Cart with Low Price Guarantee
The Fender 1270P Powered Monitor is perfect for anyone who needs big sound on a small stage. Despite its compact design, this biamped monitor produces a lot of volume (109dB SPL) pumping 100W through its 10" LF and 1-1/2" HF drivers. A great solution whether your problem is a tight stage or a tight budget.
B-52 Matrix 2000 Speaker Sound System
 1499.99 Learn More or Add to Cart with Low Price Guarantee
The B-52 Matrix 2000 Speaker Sound System consists of 2 - 12" 2-way speakers, an 18 subwoofer with a 3-channel amplifier, and circuitry housed in a separate compartment on the sub unit's back. A 600W amp drives the subs, and 2 - 300W amps drive the 2-ways. All of the components are matched for the best possible sound and balance with minimal tweaking. All you have to do is connect the Matrix 2000 system components, plug in the power cord, plug in your mixer or other sound source, and you're ready to go!The B-52 subwoofer enclosure is divided into 2 separate compartments. The front chamber serves as the cabinet for the cast-frame, 4" voice coil and 18 subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all 3 components, power supply, compressor, and preamps. The subwoofer has a power handling capability of 600W and a nominal impedance of 8 ohms.Each 12" 2-way Matrix 2000 speaker is loaded with a B-52 custom-designed 12" woofer and a 1" titanium diaphragm compression driver, mounted to a 90° x 40° constant directivity horn. The speakers can be pole mounted, used as stage monitors, or flown with built-in 3/8 16 TPI hardware for permanent installations. For transport, they mount onto the subwoofer's front grille. Transporting the Matrix system is easy: Move the subwoofer onto its casters and place the included cover over...
B-52 Matrix-2000 Value Package
 1549.99 Learn More or Add to Cart with Low Price Guarantee
Value package consists of B-52 Matrix Sound System, 2 - 20' 16-gauge Horizon speaker cables, and 2 Musician's Friend standard speaker stands. The B-52 Matrix System consists of 2 - 12" 2-way speakers, an 18 subwoofer with a 3-channel amplifier and circuitry housed in a separate compartment on the sub unit's back. A 600W amp drives the subs, and 2 300W amps drive the 2-ways. All of the components are matched for the best possible sound and balance with minimal tweaking. Just connect the system components, plug in the power cord, plug in your mixer or other sound source, and you're ready to go! Comes with 3 dust covers.
Nady FWA-12 Powered Floor Monitor
 229.99 Learn More or Add to Cart with Low Price Guarantee
125W RMS through a beefy 12" driver is serious power for any stage monitor, or use it as another main. 4" x 10-1/2" compression piezo horn for sparkling high-end. The Nady FWA-12 Powered Floor Monitor has 3 channel inputs that include XLR and 1/4" mic level, balanced XLR and 1/4" line level, plus balanced XLR and dual RCA line level. Each of the channels features input gain control, making it so versatile you could use it for a solo act without a mixer. Line level balanced XLR and unbalanced 1/4" outputs make any kind of chaining a breeze. Master volume, treble, and bass controls; power and clipping LEDs; and on/off switch. Durable black carpet cover, reinforced corners, and recessed carry handles. 60Hz to 18kHz response and 90dB S/N ratio. 16.5"W x 26"H x 19.1"D, 49 lbs.
Galaxy The Galactic Monitor Package
 579.99 Learn More or Add to Cart with Low Price Guarantee
The Galactic Monitor Package from Galaxy Audio includes 2 Hot Spot VC personal monitors; one Core PA5X 146W one-piece sound system/powered monitor; 3 stand adapters; 2 - 25', 16-gauge speaker cables with 90 - 1/4" plugs and cable locks; one heavy-duty water-resistant nylon bag with removable inner dividers and shoulder strap. Hot Spot VCs feature 3dB-stepped attenuator volume control, 16-ohm cabs with 2 - 5" drivers, 200W continuous power rating. Core PA5X140 puts out 146W @ 4 ohms and 100W @ 8 ohms with .05% THD and features SmartALIC all-level input control and built-in compressor/limiter.
Roland CM-30 Cube Monitor
 175.99 Learn More or Add to Cart with Low Price Guarantee
The Roland CM-30 Cube Monitor delivers 30W of audio punch through a rugged, high-quality 6.5" coaxial 2-way speaker with stereo preamp. The CM-30 is designed for home-studio and wide-ranging monitoring applications, but it can be used for live monitoring onstage as well.The CM-30 offers more than enough inputs to simultaneously connect a microphone, a keyboard, a rhythm machine, and a CD player, or to function as a mini-PA rig. It's equipped with 3 input channels, with one XLR mic/line input and 2 additional aux RCA and stereo mini-phone inputs, making a total of 5 simultaneous inputs possible (4 stereo and one mono input). The Stereo Link function allows 2 CM-30s to be linked for true stereo output, which enables a total of 10 inputs. Sound can be further refined with the CM-30's onboard 2-band equalizer. As with all other controls, the EQ knobs are conveniently located on the front panel for quick access.The CM-30 can be easily and safely toted from location to location thanks to its built-in handle grip, protective metal grille cover, and cabinet corner protectors. Other handy features include a stereo headphone jack and mic stand adapter.
Alesis Transactive 50 Multipurpose Amplifier/Mixer
 199.99 Learn More or Add to Cart with Low Price Guarantee
The versatile Alesis Transactive 50 mixer/amplifier provides 50W of power and combines a 5" woofer and 1" tweeter with 2 input channels, one aux input, a selection of internal digital effects, and 3-band EQ, making it ideal for many applications, from practice or stage amplification for musicians to an intimate PA setup for vocalists. Channel 1 features a combo connector for accepting microphones with either XLR or 1/4" connectors. The Transactive 50's compact size and a handle slot built into the rugged injection-molded enclosure makes it easy to transport and it fits in anywhere with a variety of setup options. A mic stand mount on the underside of the enclosure facilitates polemount usage, or it can be wall-mounted and used as an installed PA cabinet. Fluorescent lighting above the front panel controls makes it easy to see in dark clubs. In addition, its Stereo Link feature lets you create a stereo system by cascading 2 Transactive 50s, making a terrific PA system for small clubs. You can practice in full stereo with effects via headphones and it includes RCA aux inputs for patching CD/MP3 players or similar electronic equipment.
Galaxy Micro Spot VC Speech Monitor
 69.99 Learn More or Add to Cart with Low Price Guarantee
The Galaxy Micro Spot VC Speech Monitor is designed to take up less space than conventional speech monitoring systems without sacrificing sound quality. The powered Micro Spot is ideally suited for studio talkback and environments where intelligibility is crucial and space is limited.100W power handling, a NEOLITE neodymium 5" driver, and bandwidth focused from 150Hz to 18kHz provide the most accurate reproduction of the human voice. Independent volume control lets you get the level right for your ears. Ferrofluid cooling of the voice coil reduces power compression and distortion for crystal-clear monitoring.
|