DOD SR830QXLR Dual 15-Band EQ

Longer-throw 45mm faders provide more precise adjustments when EQing a room. All-steel chassis. Constant Q. Low cut filter at 50Hz with a 12dB/octave slope. Balanced XLR inputs and outputs. Balanced 1/4" inputs and impedance balanced 1/4" outputs. Shielded internal power supply. ISO 1/3 octave frequency centers.

Alesis DEQ-230 Programmable Digital Stereo Graphic EQ

The Alesis DEQ-230 Programmable Digital Stereo Graphic EQ gives you 2 channels of fantastic signal quality with 24-bit A/D/A conversion, 28-bit internal processing, and a 48kHz sample rate. The Alesis DEQ-230 has a large intuitive graphic display, 50 preset and user programs, and unbalanced 1/4" analog I/O to make it flexible enough for stage and sound reinforcement applications. -10dBV operation and external 9V AC power supply.

dbx iEQ-15 Graphic EQ

Uncompromised dbx sonic integrity enhanced with a powerful array of flexible features, including AFS one-touch feedback suppression, Type V noise reduction, and PeakStopPlus limiting. Switchable ±6 or ±15dB boost/cut range; ±12dB input gain range; 40mm faders; and nonconductive nylon sliders give you precision command. 10Hz to 22kHz frequency response, 110dB dynamic range, 2/3-octave Constant Q frequency bands, and internal toroidal transformer. 1/4" TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs.

ART 341 Dual Channel 15-Band Equalizer

This dual-channel, 15-band, 2/3-octave graphic equalizer features constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, a selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, variable input level control, clip level indicators, ground lift switch, internal power supply, and selectable line voltage switch. Each channel has its own bypass switch with LED indicator. Rugged, all-steel chassis mounts in a single 19" rackspace.

dbx 131 Single 31-Band Graphic EQ

The dbx 131 Single 31-Band Graphic EQ has balanced inputs and outputs for quiet operation. Single 31-band, 1/3-octave channel; ISO frequency centers; ±12dB input gain range; switchable 50Hz/12dB per octave low-cut filter; 20mm faders; selectable 6dB or 12dB boost/cut range; XLR and TRS connectors.

Drawmer 1961 Vacuum Tube Equalizer

Designed to complement the widely acclaimed Drawmer 1960 Mic Pre-Amp Vacuum Tube Compressor, the 1961 Vacuum Tube Equalizer combines low noise circuitry with no fewer than twelve active tube stages to provide two channels of exceptional equalization possessing unique 'personality'. Rather than employ a continuously variable resistor as a means of frequency control, the 1961 utilizes the same rotary 'step' switching system used in vintage designs . This enables the component values for each frequency band to be optimized for uncompromising performance across the entire audio spectrum and also makes setting up more accurate, particularly when treating stereo signals. The design of the 1961 allows the user to control the amount of 'warmth' by deciding how hard to drive the tubes giving a sound as 'clean' as the best discrete solid state designs or as 'hot' as the 'hottest' classic tube designs. The 1961 and 1960 Can be 'interlinked' to provide, in effect, a two channel vacuum tube mixing console, - the perfect mastering or post audio 'sweetening' tool. Facilities available on the 1961 include: Input level A variable input level of -20dB to +20dB ensures compatibility with a wide range of input source material and enables the user to optimize signal level and drive the tubes 'soft' or 'hot' as required. LED bargraph displays give a clear indication of the input signal level.High Pass Filter A variable...

dbx 215 Dual 15-Band Graphic EQ

The dbx 215 Dual 15-Band Graphic EQ was designed to be simple to use yet meet the demands of professionals. Dual channels, 15 - 2/3-octave bands, ISO frequency centers, ±12dB input gain range, and switchable 50Hz/12dB per octave low-cut filters. In addition 20mm faders, selectable ±6 or 12dB boost/cut range, XLR and 1/4" TRS connectors, balanced inputs and outputs, and chassis/signal ground lift capabilities for hum isolation. 108dB of dynamic range, internal toroidal transformer, a front-panel bypass switch, and 4-segment LED ladders. You get uncompromised cutting-edge performance, entry-level simplicity, and an affordable price. Single rackspace.

DOD SR831QX 31-Band EQ

1/3 octave, 31-band, constant- Q equalizer housed in a 2 rack space, all-steel chassis. It includes a shielded internal power supply, balanced XLR and 1/4" I/O. Also features a low cut filter at 50Hz with a 12dB/octave slope.

dbx 2231 Dual 31-Band Graphic Equalizer

The dbx 2231 Dual 31-Band Graphic Equalizer gives you 2 channels with 31 bands, each 1/3 octave to achieve the most precise tone control you can get. The dbx 2231 equalizer combines a superb EQ circuit, a powerful limiter, and revolutionary Type III noise reduction that increases S/N ratio by 20dB. The PeakPlus limiter's threshold ranges from 0dBu to +20dBu and can transparently tame the wildest hits or subtlest nuances of any signal. A 4-segment LED bar graph for both gain reduction and output level offers the most comprehensive visual feedback available. XLR, barrier strip, and 1/4" connectors; 45mm nylon sliders; and 12dB input gain stage provide pro flexibility and performance. dbx also includes status LEDs for all settings on the front panel of the 2231 Dual Graphic Equalizer.

Alesis DEQ-830 Programmable Digital Graphic EQ

The Alesis DEQ-830 Programmable Digital Graphic EQ sports 8 independent, programmable 1/3-octave graphic equalizers with MIDI I/O and an extremely intuitive user interface, all in a compact 1U rackmount design. Connections include 8 balanced 1/4" TRS analog I/O and 8 channels of ADAT optical digital I/O, making the Alesis DEQ-830 the perfect EQ unit for a wide range of modern recording applications. Other standout features include 100 user-customizable EQ programs, 50 template curves for rapid setup, and +4dBu/-10dBV switchable operation.

ART 355 Dual Channel 31-Band EQ

Its long list of impressive features includes constant Q circuitry, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, balanced XLR and 1/4" and unbalanced RCA input and output connections, adjustable high-pass and low-pass filters, variable input level controls, signal clip level indicators, ground lift switch, internal power supply, and selectable line voltage switch. A rugged, all-steel chassis occupies 2U rackspace and fits standard 19" racks.

Rane PE 17 Parametric EQ

Like the PE 15, the PE 17 is a single-channel, five-band device of incredible versatility. It incorporates all the required features of a parametric equalizer and full-function notch filter set. Each of its five filters covers a center frequency range of 4 octaves, a bandwidth of .03 to 1.5 octaves, and a boost/cut range of +15dB to -20dB. Bands one and five switch to allow peaking or shelving characteristics. All parameters are completely independent. In addition to these PE 15 features, the PE 17 adds separate in and out gain controls, sweepable low- and high-cut filters, 100% overlapping bands with improved dynamic range and noise performance. Residual noise is below levels required by digital recording equipment, making the PE 17 ideally suited for all critical digital audio studio, sound reinforcement, and broadcast applications.

Peavey PV 215EQ Graphic Equalizer

The PV 215EQ is a dual 15-band 1/3-octave graphic EQ incorporating Peavey s legendary low-noise, low-distortion design. Ruggedly constructed, the PV 215EQ lets you select between 6 dB or 12 dB cut or boost over frequencies ranging from 25 Hz to 16 kHz. Low cut filter switch with status LED helps remove rumble from open mics. Other features include balanced inputs and outputs and bypass switches.

Peavey PV 231EQ Graphic Equalizer

The PV 231EQ dual 31-band 2/3-octave graphic EQ features Peavey s legendary low-noise, low-distortion design. The PV 231EQ has center-detented fader controls and offers selectable 6 dB or 12 dB gain over frequencies ranging from 20 Hz to 20 kHz and an LED display indicating level. Other features include variable-state low-cut and high-cut filters, XLR balanced inputs and outputs and bypass switches. PV 231EQ filters are set at ISO center frequencies within 3% accuracy.

dbx 231 Dual 31-Band Graphic EQ

The dbx 231 Dual 31-Band Graphic EQ is the end-result of a quest for exceptional sound, performance and reliability. Dual-channels, 31 - 1/3-octave bands, ISO frequency centers, ±12dB input gain range, switchable 50Hz/12dB per octave low-cut filters, 20mm faders, selectable 6dB or 12dB boost/cut range, XLR and TRS connectors, nonconductive nylon sliders, and balanced inputs and outputs for quiet operation. 2U rackmount.

Rane DEQ 60L 1/3-Octave Graphic Equalizer

The graphic equalizer was made to provide a tool you could use to draw the frequency response you wanted on the unit's front panel. For years, graphic equalizers compromised the seemingly unattainable goal of a response that truly matches the slider settings-until Rane designed the DEQ 60L.Digital Signal Processing (DSP) allows filter technology not possible with analog designs. Rane coined this new technology "Perfect-Q" to describe the world's first true graphic equalizer whose output response precisely matches its front-panel settings.Perfect-Q features virtually no band interaction and extremely low ripple between adjacent bands. Rane wanted to keep things interesting and flexible-fear not proportional-Q lovers-for each channel of the DEQ 60 is selectable between Perfect-Q or proportional-Q response.

Rane PEQ 55 Parametric EQ

The PEQ 55 is a problem solver, creative tool, and secret weapon. It features 5 bands of fully parametric equalization, adjustable High-Cut and Low-Cut Filters, and 3 bands of Accelerated Slope Tone controls per channel. Front panel controls select between dual mono 5-band, stereo-linked 5-band or stereo- linked 10-band operating modes. Familiar analog ease-of-use combined with high performance digital technology make the PEQ 55 ideal for professional sound reinforcement, fixed installation, broadcast and recording applications. Its digital design allows features not possible with conventional analog EQs,. These include the ability to A/B two curves, link channels, improved accuracy, and exceptional immunity to RF and electromagnetic interference. It also results in lower cost per filter.

Mackie Quad EQ 4-Channel Digital Graphic Equalizer

The Mackie Quad EQ employs 4 - 30-band graphic, Adaptive-Q Equalizers to provide equalization <## HC plus mn ##>12dB using 30 individual EQ filters, without the ripple and boosting effects found on traditional (Constant-Q) units. These Adaptive-Q filters and super-accurate LED display ladders paint a highly detailed picture of the Quad EQ's effect on the output signal. In other words, what you see in the display is what you get.Of course, if you're the type of person that likes to measure and analyze, you'd really want to get a mic and an RTA unit. For the first time, sound-pressure level (SPL) and SMAART real-time analyzer (RTA) meters are no longer expensive add-ons, but part of a fully integrated, user-friendly package. The Quad EQ includes an SIA reference mic, as well as a dedicated reference mic input. Once plugged in, SPL can be displayed via a bright 3-digit display in the upper right corner. Or simply press the mic button and the RTA will display what's going on in the room, on the same ultrabright ladders as the EQ filters. In this way, you can simultaneously view your EQ settings versus what the results are. And RTA data is post EQ, so if you encounter feedback, you can quickly see it, cut it, and view the results. Mackie also added some features live sound folks will really appreciate: 99 user snapshots to store and recall your EQ settings; a built-in pink noise generator; variable hi and low...

Alto EQU215 Dual 15-Band EQ

The EQU215 is designed to be useful for a wide range of frequency-related audio reinforcement applications. It features 6dB/12dB selectable control range, bypass function, switchable hi- and low-pass filters, signal clip pilot, ground lift, selectable (115Vac/230Vac) line voltage, and balanced XLR, TRS, and RCA I/O.

Or

<< Previous    [1]  2    Next >>