Behringer ULTRA-DI PRO DI4000 Direct Box

The Behringer DI4000 Ultra-DI Pro Direct Box makes it easy to connect several signals to your console without hum or other noises. Up to 40dB of switchable input attenuation lets you connect anything from unbalanced line and instrument signals, to an amp's output with up to 3,000W. There's even a built-in preamp to pump up weak signals. 4-channel DI also includes gold-plated XLR and 1/4" inputs/outputs, shielded internal power supply, 8-segment LED, and more. One rackspace.

Radial HotShot DM1 Mic Signal Muting Footswitch

Allows the vocalist to depress to mute his mic with a footswitch and redirect the signal to the monitoring system and/or intercom. This passive floor box is equipped with an XLR mic input, momentary footswitch, and main and monitor XLR outputs. Designed for dynamic microphones.

DOD VAC275 Direct Box

The DOD AC275 is an active direct box offering high to low impedance conversions. It can accept high impedance line level signals, or powered speaker outputs to provide a low impedance feed tapped from between the amp and the speaker cabinet. The AC275 also includes a switchable ground lift and dB pad and operates on battery or phantom power.

Radial JPC Active AV Direct Box

Save BIG when you buy today!

Radial ProD2 Passive Stereo Direct Box

A high-quality, passive direct box that uses 2 proprietary custom-made transformers, one for each channel, for both impedance conversion and isolation. Linear from 20Hz-18kHz, with low distortion and virtually zero phase distortion makes it perfect for live or studio performances. Because of the transformer isolation, problems such as hum and buzz caused by ground loops are eliminated, making it very easy and hassle-free to use. Features include 1/4" thru/input, - 15dB pad, and ground lift protected from damage by a protective front panel. Heavy-duty construction, baked enamel finish, and 600ohm balanced output. 3" x 5".

Behringer ULTRA-DI DI100 Direct Box

The Behringer Ultra-DI DI-100 Direct Box puts an end to hum and impedance problems. It features an extremely flat frequency response and ultralow noise for superior audio quality. An internal battery is automatically decoupled when phantom power is used. Solid metal chassis and 4 sturdy rubber legs protect the Ultra-DI from damage on tour. Frequency response: 10Hz to 90kHz. Noise level: -102dBu.

Radial JDI Duplex mk4 Stereo Direct Box

Now with dual -10dB RCA connectors and dual +4db XLR inputs. Passive DI employs a Jensen isolation transformer for optimum audio performance offering outstanding linearity at all frequencies, combined with extraordinary level handling without introducing distortion. The completely passive plug & play JDI does not require any power and has the unique advantage of eliminating 60-cycle ground loops. This makes it a definite favorite with informed audio engineers. Great for guitars, bass, and keyboards and particularly adept with high-output, broadband instruments such as active instruments and digital keyboards. May be rackmounted using the J-RAK.Housed in a 14 gauge steel welded I-beam chassis, it protects all connectors and switches with a unique book-end design. The input panel is equipped with a pair of 1/4" and RCA inputs and thru-puts. A unique Merge function provides passive mix to convert the in/thru routing into a stereo-to-mono mix function-a valuable channel saver for large keyboard rigs and multiple audio sources. Each channel is also outfitted with a 10kHz low-pass filter to eliminate high-frequency system noise and a 15dB pad for greater source control. A switch on each channel allows the user to select the XLR male input. This simultaneously introduces a 20dB pad to allow high output +4dB line level devices to interface into snake systems and splitters without requiring an external attenuator....

Radial JD7 Injector Guitar Signal Distribution System

Front panel control makes selecting amplifiers, ground paths and polarity (phase reversal) easy. The JD7 has a Class-A audio signal path that has been optimized for use with electric guitars and is 100% discreet (no op amps or chips) producing the most accurate and faithful signal at each output. To eliminate problems such as 60 cycle hum caused by ground loops without signal degradation, the world's finest audio transformers by Jensen are employed. The Radial JD7 also features a 600-ohm balanced direct output to allow the engineer to record a dry guitar track or to use the JD7 as a direct box. A balanced input allows a pre-recorded track to be sent back into the JD7 which can then drive amplifiers, effect pedals, and other devices.

Radial JS2 Passive Mic Splitter Direct Box

Features electrically isolated XLR I/O, a second auxiliary direct throughput with ground lift, and a transformer-isolated output. Has a 30dB pad, supplies 48V DC phantom power for microphones, has a ground lift, and has common mode noise rejection up to -100dB at 60Hz. Features a stand-alone housing with 14- gauge, I-beam steel frame with baked enamel finish and an innovative bookend cover.

Behringer GI100 Ultra-G DI Box

The Behringer GI100 Ultra-G DI Box features a switchable speaker simulation that so realistically emulates a 4x12 cab you may never mic your speakers again. Features include switchable input attenuation allowing levels of up to +48dBu, a ground lift switch to eliminate loop problems, and a rugged roadproof aluminum case. An internal battery automatically shuts off when phantom power is connected.

Behringer ULTRA-DI DI600P Passive Direct Box

The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.

Behringer ULTRA-DI DI400P Passive Direct Box