Event Tuned Reference 8XL Biamplified Monitors

The Event Tuned Reference 8XL Biamplified Monitors are intended for the monitoring environment that requires high volume levels. They use the same design as the original TR8 with powerful independent amplifiers that deliver 150W of biamplified (100W LF; 50W HF) power to each monitor. The amplifiers use a high-performance toroidal transformer for superior noise characteristics and have an LED power indicator. Design employs a 2.6kHz, active fourth-order crossover. The Tuned Reference also has RF interference, magnetic shielding, output current limiting, over temperature, turn-on/off transients, subsonic filter, and internal fuse protection. 8" LF driver has a mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround, is coupled with a 1" ferrofluid-cooled silk dome HF driver. The monitors include balanced XLR and 1/4" inputs, as well as unbalanced RCA ins. Frequency response: 35Hz - 20kHz, ±3dB (-2dB @ 38Hz), ref. 500Hz.

JBL 5.1 Surround Sound System

Includes 5 LSR6325P satellite speakers and a LSR6312SP subwoofer.The satellites have 5-1/4" woofers and high-frequency transducers driven by 100W/50W respectively. The 12" subwoofer has a 250W amp.Very flat frequency response is achieved through special technologies that compensate for problems in the mix environment. Linear Spatial Reference technology ensures smooth and accurate mid- and high-frequency content at the mix position, and a boundary compensation setting corrects spectral shift and assures a flat response when wall-mounted or placed on a surface. Monitors are equipped with balanced +4dBu XLR and unbalanced -10dBV RCA inputs and have a front-panel power switch and volume control. The LSR6312SP uses a 250W continuous- power amp to power its 12" subwoofer with JBL's patented Neodymium Differential Drive NDD. An integral bass-management system provides all the features you need for multiformat surround production including: LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4dB alignment setting, and JBL's RMC (Room Mode Correction) system. The RMC Calibration Kit is included.

Mackie HR624 Active Studio Monitor

The Mackie HR624 Active Studio Monitor is a 2-way, biamplified, active system featuring the same HF transducer, cast-zinc wave guide, dual FR Series power amplifiers, and an integrated rear-firing passive radiator to increase bass response. Can be used as L/R monitors with or without a subwoofer, or as rear- channel sources for 5.1 and 7.1 surround systems. Features a 6.7" extended LF woofer and a 18" aluminum liquid-cooled tweeter. The amps provide 100W for the woofer and 40W for the tweeter. Inputs include 1/4", XLR balanced, and RCA unbalanced. Rear-panel controls include sensitivity, an 80Hz high-pass filter, a -2/0/+2dB HF shelving filter, an acoustic space control, and auto on switch.

JBL LSR4326P Powered Studio Monitor Pair

The JBL LSR4300 Series Studio Monitors are designed for critical stereo and multi-channel audio production applications that require exceptional spectral accuracy and high SPL capability. Exclusive technology from JBL automatically analyzes and corrects the response of each speaker in the room for absolute accuracy in mixing.Acknowledging that much of today's production is carried out in acoustically untreated rooms, the LSR4300 Series is the first professional monitor to combine JBL's Linear Spatial Reference technology and automated RMCTM Room Mode Correction, an onboard system that automatically compensates for low frequency anomalies measured at the mix position. The LSR4300 enhances computer-based production by incorporating system-wide volume control, input source selection, individual speaker solo and user EQ. Harman HiQnetTM Network protocol enables centralized system-wide control from any speaker, wireless remote control, or computer using LSR4300 Control Center Software.438H Low Frequency Transducer The 6.25" woofer utilizes a powerful, shielded neodymium magnet which can be used in close proximity to CRT-type monitors with no interference. The transducer utilizes a copper-clad polepiece that improves high frequency output by reducing voice coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing distortion....

JBL LSR4328P Studio Monitor Pair

The JBL LSR4300 Series Studio Monitors are designed for critical stereo and multi-channel audio production applications that require exceptional spectral accuracy and high SPL capability. Exclusive technology from JBL automatically analyzes and corrects the response of each speaker in the room for absolute accuracy in mixing.Acknowledging that much of today's production is carried out in acoustically untreated rooms, the LSR4300 Series is the first professional monitor to combine JBL's Linear Spatial Reference technology and automated RMCTM Room Mode Correction, an onboard system that automatically compensates for low frequency anomalies measured at the mix position. The LSR4300 enhances computer-based production by incorporating system-wide volume control, input source selection, individual speaker solo and user EQ. Harman HiQnetTM Network protocol enables centralized system-wide control from any speaker, wireless remote control, or computer using LSR4300 Control Center Software.438H Low Frequency Transducer The 8" woofer utilizes a powerful, shielded lightweight neodymium magnet which can be used in close proximity to CRT-type monitors with no interference. The transducer utilizes a copper-clad polepiece that improves high frequency output by reducing voice coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing...

Mackie HR824 Studio Monitor

The Mackie HR824 Studio Monitor is an active, biamplified speaker that delivers a wide, deep, and incredibly detailed sound field. You can actually hear distinct tonal qualities of an instrument's low end. High frequencies and midrange are clean and articulate. A low-frequency acoustic space control makes it easy to tailor the sound to your space. Internally powered by 2 smaller versions of Mackie's FR M•1200 power amp, delivering 150W for the lows, 100W for the highs. Features a 1" alloy dome high-frequency transducer, an 8-3/4" low-frequency transducer, 1/4" and XLR inputs, overload/clip LED, and logarithmic wave guide. 34 lbs.

Fostex PM0.5 MKII Active Nearfield Studio Monitors - Pair

Fostex employs the latest cone material technology to obtain extremely pure music reproduction with the PM0.5 MKII Active Studio Monitors. Biamplification provides 40W to the 5" LF drivers and 18W to the extremely responsive 3/4" soft-dome tweeters. With the MKII upgrades, the tweeters are now a one-piece assembly with a redesigned damper to eliminate interference for clearer high-frequency response, and the cabinets sport a high-gloss piano black finish on their front. The compact cabinets are specially designed to eliminate unwanted resonance and incorporate a long bass port for deep and accurate low- frequency response.The carefully tuned enclosures and circuitry produce great full range performance with exceptional neutrality even at high SPLs. The LF driver cones are made from cut-and-milled aromatic polyamide fibers that are simultaneously resin-impregnated to achieve high rigidity and optimum damping. The cones also have an olefin film thermally adhered to their surface to control frequency response and to ensure long-term reliability. Resin-impregnated cellulose dust caps cover voice coils made of high-purity copper wire for achieve extremely low distortion. Each soft dome tweeter uses UFLC (Poly Urethane Film Laminated Cloth) technology for lightweight and quality performance. Each amplifier is precisely calibrated to match the performance capability of its driver.

Event TR6 Tuned Reference 6 Active Monitors

The Event TR6 Tuned Reference 6 Active Monitors are perfect for the small sound studio. 6.5" mineral-filled polypropylene cone LF drivers with 1-1/2" voice coils and damped rubber surrounds, 1" ferrofluid-cooled natural silk-dome tweeters, and 2.6kHz active 4th-order crossovers provide peerless monitoring accuracy for amazingly low outlay. 106dB output is way higher than speakers with comparable wattage, 80W biamplified 50W low frequency and 30W high frequency. Tuned to provide flat frequency response for a true sonic reference when mixing.

TASCAM VL-S21 Powered Monitor Speaker System with Sub

This self-powered Tascam VL-S21 powered monitor satellite system provides 5W per channel to the desktop speakers and 15W to the ported sub. Remarkably thin, the stylish desktop speakers can be used nearly anywhere while taking up minimal space.Unlike multimedia speakers designed for listening to MP3s and video games, the VL-S21 was designed with a flat frequency response for critical listening and mixing. They're ideal for home recording studios, practicing with TASCAM's CD Trainers, or monitoring desktop and laptop computer recording systems. These powered monitors were created for musicians looking for an affordable speaker system that don't take up a lot of desk space, the VL-S21 is an excellent entry-level monitoring solution.NXT technology drivers in the left and right units allow full-range sound despite the thin housing. The NXT approach improves on the traditional woofer and tweeter design by eliminating the phase cancellation that occurs when using multiple drivers and crossovers. NXT drivers provide wider dispersion, more uniform loudness, and reduced room interaction than competing technologies. A single NXT Tascam driver covers a wider range than traditional drivers, reducing the phase distortion caused by using multiple drivers and crossovers.

Alesis M1 Active 520 75W Active Near-Field Reference Monitor

The M1 Active 520 offers incredible definition and flat frequency response with the help of high-precision drivers and a carefully designed crossover. The rear-port provides deep bass-extension and high SPL output, and the rear-mounted EQ switches allow the user to tailor the speaker to the studio environment. A 1 -thick front baffle minimizes speaker resonance and the acoustic waveguide evenly disperses high-frequency sound. The Bass Density control lets you to dial in balanced sound regardless of room or placement. A top-mounted power/clip indicator lets you know if the speaker is clipping.

Fostex PM-2 MKII Active Nearfield Studio Monitors - Pair

Fostex employs the latest cone material technology to obtain extremely pure music reproduction with the PM-2 MKII Active Near-Field Studio Monitors. Biamplification provides 120W to the 8.75" LF drivers and 120W to the extremely responsive 1" soft dome HF tweeters with independent gain control. With the MKII upgrades, the tweeters are now a one-piece assembly with a redesigned damper to eliminate interference for clearer high-frequency response, and the cabinets sport a high-gloss piano black finish on their front. The compact cabinets are specially designed to eliminate unwanted resonance and incorporate a long bass port for deep and accurate low-frequency response.The carefully tuned enclosures and circuitry produce great full range performance with exceptional neutrality even at high SPLs. The LF driver cones are made from cut-and-milled aromatic polyamide fibers that are simultaneously resin-impregnated to achieve high rigidity and optimum damping. The cones also have an olefin film thermally adhered to their surface to control frequency response and to ensure long-term reliability. Resin-impregnated cellulose dust caps cover voice coils made of high-purity copper wire for achieve extremely low distortion. Each soft dome tweeter uses UFLC (Poly Urethane Film Laminated Cloth) technology for lightweight and quality performance. Each amplifier is precisely calibrated to match the performance capability of its driver.

Tannoy Precision 8D Active Studio Monitor - Each

The Precision 8D reference monitor from Tannoy is an active version of the Precision 8 range incorporate powerful digital amplification and advanced electronic processing that together take full advantage of the drivers' capabilities. The result is greater dynamic range and low-frequency extension, higher output levels, lower distortion and enhanced reliability.The Precision 8D reference monitor addresses the needs of professional users in recording, broadcast and post-production. Designed using the latest techniques, including Klippell symmetry and nonlinear distortion analysis, laser scanning interferometry and advanced acoustic CAD simulation. The Precision range takes its place as the new reference monitoring standard for professional users.From the front: • 40mm MDF sculpted baffle stiff, heavy and rigid and minimizes diffraction. • Recessed drive units flush with the baffle surface minimizes diffraction. • 10 point fixing maximizes contact between drive unit and baffle. • Drive unit development using Klippell analysis equipment to minimize offsets and linearise the suspension components. • Cast chassis Tannoy Dual Concentric point source constant directivity driver. Effectively two drivers properly merged into one, with the HF mounted on the back of the LF unit so that both drivers are on the same axis, As a result sound energy is...

KRK RP-5 Rokit Powered Reference Studio Monitor

The KRK RP-5 Rokit Powered Reference Studio Monitor features a 5" woofer made of a woven glass aramid composite for a tight low-end response. 1" soft- dome tweeter emits natural sounding highs. The RP-5 drivers are electronically crossed over and biamped for increased efficiency. All of this is housed in an attractive KRK cabinet with radiused corners that reduce edge diffraction, resulting in better audio imaging. The monitor's rear input panel has RCA, 1/4" TRS, and XLR connectors.

KRK RP-6 Rokit Powered Reference Studio Monitor

The RP-6 Rokit powered monitor features a 6" woofer made of a woven glass aramid composite for a tight low-end response. 1" soft-dome tweeter emits natural-sounding highs. The drivers are electronically crossed over and biamped for increased efficiency. All of this is housed in an attractive cabinet with radiused corners that reduce edge diffraction, resulting in better audio imaging. The rear input panel has RCA, 1/4" TRS, and XLR connectors.

KRK RP-8 Rokit Powered 8 Reference Studio Monitor

Perfect for home recording studios, the RP-8 Rokit powered monitor features an 8" woofer made of a woven glass aramid composite for a tight low-end response. 1" soft-dome tweeter emits natural-sounding highs. The drivers are electronically crossed over and biamped for increased efficiency. All of this is housed in the RP-8's attractive speaker cabinet with radiused corners that reduce edge diffraction, resulting in better audio imaging. The rear input panel has RCA, 1/4" TRS, and XLR connectors.

<< Previous    1  2  [3]  4  5  ...8    Next >>